Rendering

GET YOUR FREE SURVEY NOW

Rendering and Coatings

Click on any of the thumbnail pictures to see a full size image

Large Flat Rendered House. Patch & Repair Rendering

Mask Windows etc

Apply Acticide Biowash. High Pressure Application of Wall2WallRenders and Coatings

Another Example

(1)Prime (2)Before Flat Rendered House (3)Large Flat Rendered House (4)Mask & Prime

(1) Patch & Repair Rendering (2)After Wall2Wall Coating (3)Before Defective Render

Apply Buiocide

Large Gable before and after

Another Example

Various stage developments

SPECIALIST RENDERING TREATMENTS AND APPLICATIONS

Treatment of Ivy infested surfaces

Another Example

Before: Very uneven untidy surface (2) Bonding Slurry Coat: 1-1 Latex, cement & fibre bonding coat

Before: Untidy windows uneven various surface. After Patch Repair: Apply latex modified scratch Coat Section showing 3 different coats

Before & after close up of window area rendered flat ready to be primed and coated in fine texture.
After & ready for Wall2Wall: Surface is smooth and has no undulations After masking again & priming this surface will take Wall2Wall Smooth or Fine/Standard texture Life expectancy of coating will be in excess of 25 years

Prior to treatment (stage photo) Different pre-treated view

Different views

Water jetted & cut back Brick beds to aid in render adhesion. (2) Scratch coat top

Bonding coat & scratch Topcoat. (2)Water Jetted & Masked

Bonded brickwork. Rendering on brick work ready for coating

Another Example

This typical 60s building had recently undergone a major refurbishment the outside facade was covered in green tiles.
The most economical solution was to clad the frontage with marine ply, then add a mesh scrim and trowel apply out Wall2Wall fine texture to create a hard wearing attractive light stipple finish

another

Another Example

This type of application requires a full scaffolding of the property

Top coat render is 'saw toothed' to aid in a seamless application of the next application

Corners are 'beaded' using galvanised steel this protects corners from accidents

All windows, doors and other areas are masked prior to Wall2Wall application

The render is applied and allowed to cure

Masked and primed

Wall2Wall pressure Application process

After the Wall2Wall application

Now sporting its 'Sunday Best'

Another Example

The Job in hand, a weather beaten gable end

An antifungal power jetting and 'Biowash'

Application of special primers and sealants

A complete masking is needed for non treated surfaces

After the 'Makeover', protecting and enhancing this gable patio area

Another Example

Wall2Wall Solutions and Resin based coatings have the answers to your external wall façade problems
It’s the finer attention to detail that makes all the difference!
The owners of this house were fed up of water damage caused by the ingress penetrating damp (and the rolled up tea towels on the windows sills)
During the survey it was noted that not only was the water entering the walls through the external cracks in the render but also the windows had a design flaw that was allowing the wind driven rain to enter though the mastic joint
Due to the very exposed location of this house it was recommended that the top sections of the windows be treated with a ‘drip shield’ this is formed from a stainless or plastic bead then moulded with latex modified render.
Now it has been coated in Wall2Wall the water simply ‘beads off’ and away from the window.

Another Example

A 1930 pebble dashed original section of house and a 1970s composite stone block extension, the client wanted it to be uniform with an elegant look, hence the real stone ashlar quoins. The property was coated in a two coat Polymer render then coated in a Goodyear based fine textured paint finish

Front Elevation upon arrival. 1970's style overhang balcony. 2 more elevations

All elevations need to be scaffolded. Access Points. Work in progress. Repair work needed

The End Result
Prior to application of Pliolite,
all windows and doors are masked